-
About UsHenan Shuizhuangyuan Pipe Industry Co., Ltd. was founded in 2004 with a registered capital of RMB 20 million. It is located in the Industrial Cluster Park of Xiuwu County, Henan Province.
-
ProductsThe company is mainly engaged in the research, development, production and sales of various plastic pipes for water supply and drainage, electric power transmission and floor heating and other plumbing supporting products.
-
ServiceThe products are widely used in petrochemical industry, gas supply, domestic water supply, municipal water supply and drainage, intelligent irrigation, electric power and communication cable sheath and other fields in China.
-
-
-
26
2022
-
12
PPR pipe fittings manufacturers talk about Ppr water pipe decoration technology! Come and check for defects
Source：
Time：2022-12-26 13:37
PPR pipe fittings manufacturers talk about Ppr water pipe decoration technology! Come and check for defects
PPR pipe fittings manufacturers think it is better to let plumbers do it first and then slot on the ground, in case the water pipe they connect leaks.
Judging from the connection of PPR pipes, it is hot melt connection, and the melting temperature is 260 degrees. From your installation scale, you should refer to your design scale, which has to be designed according to your home decoration. Generally, PPR cannot be exposed. An exposed PPR will deform due to gravity, and an exposed PPR is easy to age. If it is white PPR, it is easy to spread light to breed bacteria, it is recommended to be buried.
PPR water pipes can also be connected with hot melt sockets. The pipes and fittings are completely integrated. The strength of the joints even exceeds the pipe body. As long as the construction is proper, it can pass the pressure test after completion, with high reliability.
PPR tube is afraid of long-term sun exposure. When installing, it can be properly set with foam insulation sleeve and 3.4 thick hot water pipe, which is more durable. Of course, PPR tube should be of a big brand, and Taurus or Jinde is recommended.
PPR Pipe Fittings Factory: PPR Tap Water Pipeline Installation Process
1. After the pipes and fittings enter the site, they will be checked and accepted by the owners and workers. The water pipes should choose brand materials as much as possible, but beware of counterfeit products. If there is an anti-counterfeiting mark, you can inquire by phone and don't forget to check the certificate of conformity of the products.
2. The installation of hot and cold water pipes should be left hot and right cold, with a spacing of not less than 30mm. Use a pencil to fix the positions of the upper and lower metal pipe cards, the distance between the two points should not be less than 800mm, and then use an electric hammer to punch holes in the positioning points.
3. Nail the screw of the metal pipe clamp, nail the wooden wedge in the hole, screw the screw of the metal pipe clamp on the wooden wedge, and be sure to nail the screw firmly on the wooden wedge to prevent loosening.
4. Hot melt according to the measured size, and the temperature is controlled at 260. If the temperature is too high, the pipe wall will heat up and deform. After hot melt, the water pipe and the pipe head will be quickly joined to ensure the tight combination of the melting ring.
5. Place the connected water pipes on the shelf, tighten the pipe clamps one by one with a screwdriver, pay attention to the force points at the corners, the pipe mouth must be tightened, and the installation position of the valve should be correct and smooth (calculate the thickness of the tile paving), which is convenient for use and maintenance.
6. All plugs are sealed. The water pressure is measured as 8-10mpa with a pressure test pump. After half an hour, the pressure gauge shows that the water pressure drops by 0.05mpa, which is qualified. If it is unqualified, it is likely that there is a problem with the pipeline, or There is a leak at the pipe connection.
7. All plugs are sealed. The water pressure is measured as 8-10mpa with a pressure test pump. After half an hour, the pressure gauge shows that the water pressure drops by 0.05mpa, which is qualified. If it is unqualified, it is likely that there is a problem with the pipeline or there is a leak at the pipe connection.
8. Wrap a raw material belt on the thread of the plug to prevent water leakage, and then tighten the plug. The pipes embedded in the wall and floor should be treated with anti-corrosion and protected with cement mortar.
9. The owner or supervisor shall check and accept the whole water pipe laying project. The water pipe laying shall be horizontal, flat, vertical and firm. Whether the interval between cold and hot water pipes is up to standard and whether there is leakage.
The above is the PPR pipe fittings manufacturers to explain the content, if you want to know more, welcome to contact us PPR pipe fittings manufacturers.
Key words:
Related News
Hotline:+86-13303856928
E-mail:369560188@qq.com
Address: south road, west section of yunxiang road, industrial agglomeration area, xiuwu county, Jiaozuo city, Henan province
Focus on us
©2024 Henan Shuzhangyuan Pipe Industry Co., Ltd. www.300.cn SEO This website supports IPv6